had that stunt pulled with colorado scale. anything over the side of the trailer is considered overwidth. i was pulling a 96 that particular week cuz my normal 102 was in the shop. had a pallet load.
Total legal width for flat bed trailer?
Discussion in 'Flatbed Trucking Forum' started by cetanediesel, Aug 27, 2013.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I had a problem In Wy. Boomer was hanging over the side, the DOT said the handle was a hazard. Inspection. They need a job too I guess. $55.00 fine.
-
IMHO, I think it would be cheaper and more cost effective to buy a newer used trailer than the cost and hassle of all the work needed for welding. I mean what your talking about is ALOT of cutting and welding.
-
-
If ya ever get pulled over and given crap from a pig, whip out the book, find the securment section then show them they are full of #### and if he/she gives you any hell, you'll be seeing them in court then take pictures of the trailer, securment and load and then some on the point of interest. Commifornia I believe to be the only state where you can get cited for the dumbest #### in the world.
freightliner438 Thanks this. -
New Yuck and Lousy-ana can be buttmonkeys too.
-
2 26' @ $180 each = $360
2 11' @ $ 77 each = $154
30 Drings @ $4 each=$120
Total=$634
One day of my shop time=$500 That would include the torch gas, welder, wire, CO², grinder and disks.
I dont see for $1100 it would make any kind of sense to spend $20,000.00 on another trailer. But please keep me in mind when you need to put brakes on your trailer and decide to scrap it. Because that will be alot of work. I will even pick it up for free.dannythetrucker, BAYOU and MJ1657 Thank this. -
-
-
Well, I guess I'm offended too, on behalf of the real pigs that you insulted by comparing them to cops. Real pigs actually serve a purpose.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2
Related Categories
-
Winch bar extension
mitmaks posted May 15, 2025 at 7:50 PM -
Tool boxes
Gumper posted May 12, 2025 at 7:30 PM -
Thank you for saving my life
Aadams posted May 7, 2025 -
Securing giant tires
Walk Among Us posted Apr 27, 2025 -
Looking for Flatbed...
emilyny posted Apr 27, 2025 -
Pilot escort car resources and...
Kenworth6969 posted Apr 25, 2025 -
electric over air dump valve...
ohandy1 posted Apr 22, 2025 -
Anybody here know anything...
Boardhauler posted Apr 21, 2025 -
European trucker
pavrom posted Apr 18, 2025 -
Uneven Chain Tension
Milkyway2025 posted Apr 13, 2025
Loading...
Recent Threads
-
After you quit/are fired, how...
Dontknowatruckingthing posted May 16, 2025 at 1:15 AM -
Star Car Turned Into A U-Boat
mjd4277 posted May 15, 2025 at 11:41 PM -
Rolling Dirty
mjd4277 posted May 15, 2025 at 11:27 PM -
DOT blitz, huh?
86scotty posted May 15, 2025 at 10:35 PM -
Removing automatic restriction cdl
brooke0711 posted May 15, 2025 at 9:25 PM -
Driver dead after rolling truck...
JonJon78 posted May 15, 2025 at 8:56 PM -
How to start lease on owner...
letslogiboyz posted May 15, 2025 at 8:33 PM -
Winch bar extension
mitmaks posted May 15, 2025 at 7:50 PM -
Do you carry your medical...
OldeSkool posted May 15, 2025 at 7:11 PM -
What are some good 1099 jobs...
xzmpt posted May 15, 2025 at 1:09 PM
Loading...