Cab Blower Motor Not Working

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Blind Driver, Mar 3, 2014.

  1. Blind Driver

    Blind Driver Road Train Member

    3,081
    1,406
    Aug 7, 2006
    New Albany, IN
    0
    Truck is a '07 387. The 40 amp fuse labeled "AC Blower" is getting power, but I have nothing at the fan switch. I tried swapping the fuse with another, but nothing changed. It's -3* and my feet are cold :biggrin_255:

    Sleeper fan is working fine. Looks like I have a problem between the fuse panel and switch.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. cumminsISB

    cumminsISB Light Load Member

    176
    10
    Feb 5, 2011
    D'Lo, Ms
    0
    Resistor or fan motor itself. Mine did this last year, turned out to be the motor in my case.
     
  4. Tmtbob

    Tmtbob Medium Load Member

    303
    186
    Mar 3, 2014
    Oklahoma
    0
    More than likely the blower motor itself. Resister would work on high and off if it burnt up
     
  5. skateboardman

    skateboardman Road Train Member

    6,232
    5,706
    Jan 14, 2012
    flatbed heaven
    0
    I guess none of you read he isn't getting power to the switch, if the motor was bad there would still be power at the switch, run a jumper wire to the switch and see if it works.
     
  6. Tmtbob

    Tmtbob Medium Load Member

    303
    186
    Mar 3, 2014
    Oklahoma
    0
    Good job skateboardman. I read it just wasn't paying attention. It only happens when I read. I promise
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.