Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

D12A missing on no load 1550 rpm to 1900 rpm

Discussion in 'Volvo Forum' started by Oldschoolmack, Mar 9, 2013.

Page 3 of 3
  1. Mar 10, 2013 #21
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    I used cummins pedals. they are cheaper then genue volvo
     
    Pablo-UA, Mar 10, 2013
    Pablo-UA, Mar 10, 2013
    #21
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mar 11, 2013 #22
    Oldschoolmack

    Oldschoolmack Bobtail Member

    15
    0
    Mar 9, 2013
    0
    Can any one tell me the switched value of the pedal? 0 ohms (short circuit) or is it supposed to be approx 30 ohms when the switch is operated. ( Measured between pins 3 and 4 on the pedal harness connector )

    Any help greatly appreciated
     
    Oldschoolmack, Mar 11, 2013
    Oldschoolmack, Mar 11, 2013
    #22
  4. Mar 11, 2013 #23
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    I post you file with system description

    Check pages 1-3

    No load point 0.55-0.9V. In this range idle validation switch must open when you press pedal
     
    Pablo-UA, Mar 11, 2013
    Pablo-UA, Mar 11, 2013
    #23
  5. Apr 7, 2015 #24
    D12 expirt

    D12 expirt Bobtail Member

    7
    0
    Apr 7, 2015
    0
    Check the camshaft low wheel as well as the flywheel pick-up wheel jp brandow +27 79 874 6962
     
    D12 expirt, Apr 7, 2015
    D12 expirt, Apr 7, 2015
    #24
  7. Apr 7, 2015 #25
    D12 expirt

    D12 expirt Bobtail Member

    7
    0
    Apr 7, 2015
    0
    I can help you sir give me a call jp brandow +27798746962 I live in south Africa have been spesializing in Volvo 12 years
     
    D12 expirt, Apr 7, 2015
    D12 expirt, Apr 7, 2015
    #25
  8. Apr 7, 2015 #26
    D12 expirt

    D12 expirt Bobtail Member

    7
    0
    Apr 7, 2015
    0
    The low wheel on the crankshaft does not fit one way check it has a small play when you fit pow wheel hand tighten all the bolts then turn the pow wheel by hand all the way to the turbo's side off the engine be sure to keep it in that possision while fastening the bolts jp brandow +27 798746962
     
    D12 expirt, Apr 7, 2015
    D12 expirt, Apr 7, 2015
    #26
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 3 of 3