Sometimes when it rains, my gauges will stop working. Sometimes all, sometimes only some. I've sprayed that area on firewall, but couldnt recreate the problem. Anybody had same problem?
Rain and gauges
Discussion in 'Volvo Forum' started by me myself and I, May 17, 2015.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Do you have F/liner?
-
I'll give you a hint. Its in Volvo forum
-
Sorry I said Detroit an type F/liner what eng. is it detroit ? Find the ground wires that bolt on thru firewall behind or above pedals from the inside, clean all wires conn. you can find, the wiring harness where it plugs into plastic parts that pass threw firewall can need cleaning also?
Last edited: May 17, 2015
-
Had that problem a while back. I cleaned all the ground points to firewall and pass through connection problem went away
-
Its the second time it happens. And 1st time that's what I've done. Along with several other things. I'll try that again
-
Well I've finally looked at it last Sunday. Connections looked ok, so I've pit piece of plastic over it, and stuck couple of plastic bags there too. High tech
. Also I've put layer of silicone above to stop water from coming down. It started raining Sunday night, and didn't stop till Monday pm. Gauges worked fine.
-
you could also get that contact sealer spray from a marine store
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.