Just got in this truck, the clock in the LCD display appears to be set automatically, satellite or qualcom, since there is no option to adjust the hours and minutes manually. I have set the time zone for Central (Chicago) and also set Daylight Savings Time option on. I have changed to every time zone available and it is no closer than 3 or 4 hours to actual time.
I play shooter games. These puzzle games are too hard...
Mikeeee
2015 info center clock 4 hours off...
Discussion in 'Freightliner Forum' started by Pmracing, Jan 13, 2016.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Mine is five hours behind but before the Qualcomm boots up, the time will be correct and the compass works, once the Qualcomm comes on, it goes back to being five hours behind.
Pmracing Thanks this. -
HA! TechMology!
Mikeeee -
If you have an ICU4ME (new style) there are some parameters that need to be set in the ICU. It is basically a source address conflict between the QualCom and the VirtualTech. It will have to go to the dealer. Be sure to tell them to check for Service Solutions. It outlines the problem. Should be a 10 minutes fix. If they check the Service Solutions.Pmracing Thanks this.
-
10 min fix but you will be charged $125 - minimum 1 hour rate.
-
I can't tell if the time is correct on startup as mindes stated because my truck shows "Load Transfer" until I have rolled a few miles.
Thanks for the detailed reply, though there is no way the company is going to let me take it to the dealer for that problem. Hahaha
Mikeeeemindes Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.