What causes a trailer to dogtail?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by bowman316, Nov 11, 2011.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I pulled a new one that I picked up.at the factory and it dog tracked enough to rub at an Illinois toll gate.
Alignment can be adjusted, and a closed tandem is fairly simple to do. Spread axles, not so much. Especially on a drop deck. -
Not sure,maybe mismatched tires.Try a different tandem adjustment hole.Have pulled trailers where the kingpin wasn't exactly in the center of the trailer!!
-
A little blurry, but this is the worst case of that I've ever seen.
Trucker61016 Thanks this. -
DogLEG
-
They don't align them at the factory when they assemble them. The production line is moving and they don't fine tune something like that. No time for it the line must move. They basically just eye ball it and get it close enough. It's "within spec" that way and considered dealer prep work to align one anyways. Of course dealers don't do it for free. Picked up my 2016 from the factory last year and it dog tracked until I paid a Great Dane shop to align it.Grijon Thanks this.
-
This is true. I bought a 2007 Tridem drop deck brand new , when I picked it up from dealer I didn't go more then 1/2 mile and noticed it was dog tracking about a foot to the curb.
Had it aligned at a shop and lodeking paid for it. Been perfect ever since!Grijon Thanks this. -
It has to do with an unbalanced load. The trailer will track towards the heavier side.
-
You might get some argument about that.
-
I've sometimes taken and slid the tandems all the way back and kinda make sure the tandems slam a little to get them straight, then I slide them forward and it usually fixed the dog tracking....
Heavyd Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4