Altinator volt 12.5

Discussion in 'Freightliner Forum' started by gerardo1961, Jul 17, 2016.

  1. gerardo1961

    gerardo1961 Road Train Member

    1,750
    616
    Feb 21, 2010
    Miami
    0
    Hi.yesterday i was changing the altinator.now i have 12.5v when i start the engine.before with the old altinator was 13.4 is this normal.and the enginge is now shaking never i have this before.thinking to change everything from the belt in miami.when i look the engine inside betwin ventilator and belt is moving.i have a columbia 07 with cat c13 kcb 06.Thanks for yo help
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. xsetra

    xsetra Road Train Member

    5,196
    7,146
    Aug 21, 2011
    0
    gerardo1961 Thanks this.
  4. gerardo1961

    gerardo1961 Road Train Member

    1,750
    616
    Feb 21, 2010
    Miami
    0
     
  5. xsetra

    xsetra Road Train Member

    5,196
    7,146
    Aug 21, 2011
    0
    Recheck your terminal connections. Try a tester independent from your truck. May be the onboard gauge is bad.
     
  6. gerardo1961

    gerardo1961 Road Train Member

    1,750
    616
    Feb 21, 2010
    Miami
    0
    Now i have the name the serpentine belt tensioner is moving strong.nowbody have the part i fixed next week when i am home in miami
     
  7. lilillill

    lilillill Sarcasm... it's not just for breakfast

    5,642
    13,472
    Nov 7, 2007
    Possum Booger, Alabama
    0
    Check all of your main grounds. Some Cats have a ground on the engine block right in front of the starter. If that is loose, you'll get the symptoms you describe.

    Check the voltage with a multimeter right at the battery terminals (engine off). Make sure it matches the voltage at the positive terminal on the alternator.

    The alternator should bring the system voltage up to 13.6 to 14 volts once the engine is running.
     
  8. swaan

    swaan Road Train Member

    2,942
    4,374
    Jul 12, 2009
    BC canada
    0
    Should be 13.8-14.2

    Yours isn't charging . 12.5 is normal voltage for a full batt.
     
    blairandgretchen Thanks this.
  9. gerardo1961

    gerardo1961 Road Train Member

    1,750
    616
    Feb 21, 2010
    Miami
    0
    Is a new altimator.shows 12.5- before moving key.driving is 13.9
     
  10. gerardo1961

    gerardo1961 Road Train Member

    1,750
    616
    Feb 21, 2010
    Miami
    0
    My problem is the serpetin belt tensioner everything is moving and engine souds little diferent
    I drive empty home from sc
    Tomorrow iam in miami
     
  11. gerardo1961

    gerardo1961 Road Train Member

    1,750
    616
    Feb 21, 2010
    Miami
    0
    Update.i am now home in Miami .my mechanic was looking with the laptop my engine and now the altinator was good.only injector 6 is bad.now he changed the injector
    Was good to drive home for the repair
     
    fortycalglock Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.