Ok, so like. Some of you possibly seen my other post here, but this is something different. The raido i have is a Roadmaster RE6000
LOT NO: 00418872
Serial NO. 010619
The power uses a DC 13.8 v plug, Also i use an unknown 3ft long antenna (entire length is 3 1/2 ft )
The device has both NB, ANL. Also anS 1 5 9 +30In a strobe fashion in red LED Raid dose work but initial tests prooved unsucessful [/center] If anyone has any info about this raido and such, just anything in general if you know anything about these types, plz helps.
P 1 2 3 4
![]()
Dose anyone know anything about my CB radio?
Discussion in 'CB Radio Forum' started by Kovich, Aug 21, 2016.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
PLL
LC7132
Models include:- DNT 4000FM, GE 3-5828A/3-5806A/3-5808A, Fox CB240/CB440, Midland 77-104/77-805/77-805A/77-145/77-145A/77-149/77-158/77-250, Realistic TRC413/TRC415/TRC417/TRC418/TRC419/TRC423/TRC430/TRC433/TRC434, Roadmaster RE-6000/RE-8000
This chip uses ROM programming with direct VCO division.
This PLL is not easily modified.Kovich Thanks this. -
Wait what? im confused, What dose PPL mean?
-
Frequencies are generated by a pll or phase locked loop, instead of with crystals.
rabbiporkchop Thanks this. -
So i cant upgrade it?
-
It's probably not worth it. Is it 23 or 40 channels?
-
-
Omg, that's all you can find?
The radio is a branded unit, meaning some distributor/sales company bought a crap load of boards and used them to make a CB for the market. I am thinking that it is one of two boards because the fox, ge and dnt are all branded units too. Those two boards are the midland and the realistic, both can't really get the channels but they can be tuned and work good for you.
I would do this, get it to someone who can see if it works and go from there. Most idiot techs won't know what to do but there are many out there who can figure it out.Kovich, 25(2)+2 and rabbiporkchop Thank this. -
Yesterday i was driving with it on, i fixed all the little things for the voice to work, And i got someone. Or a few people on 32 as it was the only active channel with people on it. I did 10-32 a few times, the one dude said i was breaking out, eventually dead key. He was talking to someone else about me something like "He's breaking up you wont be able to hear him, Dead key dead key Hes dead key. I was on a somewhat rual road and the highway was like a while away, miles and miles so it might of been a home base Idk
-
Well that's a simple problem to solve, the mic cable needs to be replaced.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2