Cb antenna

wire cutters might work

 

Nnnnnoooooooo..

 

Here is what I use.

 

Start by cking swr o

Try change the direction of the antenna. Is it pointing straight up? Sometimes. Moving them slightly forward a few degrees at a tim and checking your swr at each move. I have mine at about 20 to 30 degrees forward and swr is around 1.0 but if i mve the antenna straight up. The swr is ober 3.0 try that before cutting it.

 

He is fine where he is now..1.2 on 20 and 1.4 on 1 and 40...Leave it....If you get somewhere with someone who has an analyzer ask them to chk resonance..
If they ask whats that is cant or dont know,just leave..

 

ONLY $10!!!!Now go add a compressor n hose....Cheaper to just get a $10-20 electric drill

 

you're not going to get 25000 RPM out of a cordless drill.
My die grinder plugs right into the air hose on the back of my truck. No compressor needed other than the one on my truck.
total investment less than 20 bucks

 

Lol

 

Most people dont need 25000 rpm....Dremel tool can if you need that speed
Hhhmmm wonder if i can get my trk to go faster if i weld a dremel to my crankshaft