Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Ddec ll programming info needed

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by cnsper, Mar 15, 2017.

  1. Mar 15, 2017 #1
    cnsper

    cnsper Road Train Member

    5,869
    27,421
    Feb 28, 2014
    0
    I need some info on parameters that you can set.

    I have a 1991 series 60 ddec 2. The cruise will not set any higher than 65 mph on the speedo. Actually 68mph on the GPS. I know that I can get someone to change that setting.

    What I would like to know is can I also set the HP at the same time. Is it just a simple setting change or is there more involved? Right now it is set at 430 HP and I know these 12.7 motors also came out at 470 HP.

    Basically, what is involved in making this change?
     
    cnsper, Mar 15, 2017
    cnsper, Mar 15, 2017
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mar 15, 2017 #2
    BoostedTeg

    BoostedTeg Road Train Member

    1,857
    3,469
    Jun 2, 2008
    Boise ID
    0
    Did you try and call up a Detroit shop? I know with the newer trucks they just plug into the ecm and make changes.
     
    BoostedTeg, Mar 15, 2017
    BoostedTeg, Mar 15, 2017
    #2
  4. Mar 15, 2017 #3
    AModelCat

    AModelCat Road Train Member

    29,423
    161,725
    Jul 7, 2015
    Canuckistan
    0
    I'm not 100% certain but I think you need dealer access level of the Detroit diagnostic program. We had the limited version of that program and IIRC all we could do was read the datastream and clear codes.
     
    AModelCat, Mar 15, 2017
    AModelCat, Mar 15, 2017
    #3
  5. Mar 15, 2017 #4
    cnsper

    cnsper Road Train Member

    5,869
    27,421
    Feb 28, 2014
    0
    Not yet. Just setting out feelers for what this would cost me. It is not a new truck, it's a 1993.
     
    cnsper, Mar 15, 2017
    cnsper, Mar 15, 2017
    #4
    BoostedTeg Thanks this.
  7. Mar 16, 2017 #5
    heavyhaulerss

    heavyhaulerss Road Train Member

    3,723
    2,040
    Dec 23, 2009
    AL/TN BORDER
    0
    you could contact 1 of several people who can reprogram the e.c.m. although the talk of the topic is not banned on google, ebay or 50 other source sights, the e.p.a, apparently bans talk of it here, wish I could be of more help, but under gag order. :crybaby:
     
    heavyhaulerss, Mar 16, 2017
    heavyhaulerss, Mar 16, 2017
    #5
  8. Mar 16, 2017 #6
    cnsper

    cnsper Road Train Member

    5,869
    27,421
    Feb 28, 2014
    0
    Not changing any exhaust treatment, there is none on a 93.
     
    cnsper, Mar 16, 2017
    cnsper, Mar 16, 2017
    #6
  9. Jun 25, 2018 #7
    Oldironfan

    Oldironfan Road Train Member

    5,776
    5,544
    May 22, 2017
    0
    I thought you said it was a 1991 engine?
     
    Oldironfan, Jun 25, 2018
    Oldironfan, Jun 25, 2018
    #7
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.