ideas on securing these tectran hoses?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by magellan, Jul 26, 2017.
Page 1 of 2
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
40" Swivel Pogo Stick Pipe With Hose & Cable Holder
We use these, you're going to chew up those lines having them rub on the catwalk. -
You could get shorter lines. Why do you have such long lines on such a short wheel base truck anyway?
-
I thought the same thing, then i thought about how my lines also hang and are super long for my short wheelbase. But if i didnt have that, id rip the lines out of the gladhands. I need the longness for when backing. I jackknife the trailer a lot to get into some of my customers.
Just yesterday i went to a new customer, i was looking at the trailer tandems on my 38 foot tanker, out my passenger window.
So, being the Op is a flatbedder, hes probably putting that trailer through some extreme angles.
It really is though, excessive that he has that much laying down on the catwalk. Hang it up op. -
I posted a thread couple days ago wondering if I should get the 12 or 15 feet lines... Guess I got my answer here I'll go with 12.
-
Put another long bungee off the top grap handle where the broom is.....
and see how it looks ...? -
Thanks,
I originally used them on another truck with a dry van. I might have to sell them and purchase a shorter set. I'll look into your recommendations. Hopefully something will work out. -
Is that working out with the 15 footers? That might be the best option
-
I have two of those springs spaced several feet apart on the hose. Works fine.
magellan Thanks this. -
Not sure what length we are running, but you can run an extra loop to take up slack.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2


