K40 whip keeps snapping.

Discussion in 'CB Radio Forum' started by Fold_Moiler, Aug 17, 2017.

  1. Kenworth 4life

    Kenworth 4life Medium Load Member

    423
    6,711
    Feb 16, 2017
    Augusta, Maine
    0
    Slow that super truck down and the wind resistance won't keep breaking them!
     
    cnsper Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Fold_Moiler

    Fold_Moiler Road Train Member

    1,926
    3,528
    Mar 17, 2017
    0
    No way! Iowa is too flat to slow down and I can't run these 800 mile days slow!

    Maybe I'll just get a k40...
     
    cnsper Thanks this.
  4. Meteorgray

    Meteorgray Heavy Load Member

    754
    597
    Jan 1, 2016
    0
    It must be the rough roads breaking the K30 whips. I've been using a K30 mag mount with a 3-foot whip for a couple of years on my highway sedan. It takes highway speeds and winds without problems. That's why I say the rough roads must be the problem.

    It seems to me trying to fit a thicker whip might put too much pressure on the little K30 base.

    You could try a Wilson Lil Wil, which is the same size as the K30. Maybe it would be sturdier for your application.

    If you can accommodate a taller antenna, the 4-foot Wilson 500 or the 5-foot Wilson 1000 or the K40 you mentioned are all great mag mounts that would provide longer range as well.
     
    Blaskowitz Thanks this.
  5. Fold_Moiler

    Fold_Moiler Road Train Member

    1,926
    3,528
    Mar 17, 2017
    0
    I'm afraid a Lil will would do the same thing since they are very similar.

    I honsestly think it's the rough roads too. It always happens when my head is bouncing off the ceiling then I hear the thing break and hit the roof and it's on the side of the road.

    I'm looking for the sturdiest magnet mount. Something with a thicker whip that won't do so much swaying and wear itself out. Does the k40 have a thicker whip?

    I don't own the truck so I don't want to dedicate an afternoon routing coax through the cab so magnet mount is perfect and I can make the coax look good with minimal time.
     
  6. CW Spook

    CW Spook Light Load Member

    Fold_Moiler Thanks this.
  7. Fold_Moiler

    Fold_Moiler Road Train Member

    1,926
    3,528
    Mar 17, 2017
    0
    On #### that with a spring would be indestructible. Do you think it would look dumb on the roof instead of mirror? My stock coax doesn't work.
     

    Attached Files:

  8. CW Spook

    CW Spook Light Load Member

    On your roof would be the much preferred place for it. It should work like gangbusters up there.
     
    Fold_Moiler Thanks this.
  9. skellr

    skellr Road Train Member

    8,737
    12,185
    Jul 17, 2011
    The Village, Portmeirion
    0
    K_30__01626.1370887314.1280.1280.jpg
    You are breaking one of these?
     
  10. Fold_Moiler

    Fold_Moiler Road Train Member

    1,926
    3,528
    Mar 17, 2017
    0
    Yeah that's where my k30 is now. I might get a 4' fire stick since my roof is low.
     
  11. Fold_Moiler

    Fold_Moiler Road Train Member

    1,926
    3,528
    Mar 17, 2017
    0
    Yup the whips keep snapping right at the base.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.