I will usually flash a truck in, without waiting for the blinker, because truckers usually understand the signalling. I generally wait for a blinker from cars, because car drivers are more often confused by the flash. If I have the option, I will flash by turning off my low beams, and turning them back on, but not every vehicle is equipped with headlight interrupts. Sometimes, all I have is a flash of the high beams, but I try to be as gentle as possible. I try not to give a flash if there is some reasonable ambiguity about who it's for, or if I see a hazard that perhaps the other driver may have missed (such as another vehicle vying for the spot, or someone on an adjacent shoulder). Finally, courtesy takes a back seat to safety; if something is going on with me, that requires my hands or my attention, I may miss an opportunity to be courteous. If I am sneezing, for example, it may not be a good time to make the nod to courtesy...
I give the thank-you flash to drivers who flash me in. Not everyone does so, even among truckers, and sometimes I do merge earlier than I would like, flash or no flash, because someone is tailgating me more closely than I would be to the vehicle that I am passing. The reasoning, here, is that if I don't get over, the tail-gater will do something far more dangerous, far closer to the vehicle that I am passing, in an effort to get past me on the right. Sometimes the tailgater turns out to be a law enforcement officer responding to a call, and maybe trying to keep a low profile as they do so. Again, not every vehicle is equipped with running light interrupts, so I will sometime give two or three emergency flashes, instead.
I do these things, whether I'm driving a commercial vehicle, or a four-wheeler. Courtesy is courtesy, regardless of the size of the vehicle.
She flashed me so I flashed her back.
Discussion in 'Questions From New Drivers' started by TommyTrucker88, Nov 22, 2017.
Page 2 of 8
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
G13Tomcat Thanks this.
-
-
201 Thanks this.
-
-
It seems some need validation for their actions. I can take the guys flashing me over but I decide when it is safe to do so not you. Flashing 3-4 times only makes me stay I the left lane longer and want to get far away from you.
-
flashers mean I am disableing and need to exit safely, markers mean thank you, blinkers mean I would like to turn, headlights flashing I frown on.
-
-
Is anyone else confused by what I see as overuse of the term "flashing"?
In my view, flashing is when you high-beam someone, and I only do that at someone coming at me who has their high beams on, as a reminder/request for them to turn them off until I can get past them. I never use them to signal safe to merge.
"Dimming" my headlights is what I used to do to signal someone passing me that it's safe to get back over. I don't do this anymore due to the potential liability, plus ,as someone said in a previous thread, a professional driver should be able to tell when it's safe to move back over on his/her own.
"Flashers" is, I think, what we normally refer to as "four-ways", which indicate either approaching some sort.of slowdown or hazardous condition, or as a thank you if you don't have marker light interrupt. Anybody else agree?tinytim, Lonesome, scottied67 and 4 others Thank this. -
AfterShock, Lonesome and JReding Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 8