You can go to international and buy the male end to splice onto your radio harnessl where you can plug it in, or just splice red to green and blk to wht. Twist and tape is good enough.
Prostar wiring help
Discussion in 'CB Radio Forum' started by chemster, Feb 11, 2010.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Ok i appreciate it man thanks
-
Didnt realize you plug the bare wires from your cb into those two slots
-
I got a lot of wires every where!! Don't care. But people who want to do easy work. Well, that's fine. I just like seeing a lot stuff dangling like my stuff and toys that my family and kids made. One was made from friend who had pass, and I hang toys that he give that he didn't want.
-
What about the Pa Spkr wire and ex spkr wires. I GOT A BLUE AND YELLOW HOW DID YOU SET THEM UP? thx in advance
-
Question about ex.speaker wire is it blue or yellow? pa.spkr as Well..how did you run them with a 3.5audio jack? Thanks in advance
-
Mine is yellow for the speaker, with a 3.5mm jack on the end. No PA in my truck.
-
Doesn't seem to be one in mine either but there is yellow and blue seems like but they are spliced open to be connected to a 3.5 jack I guess I have to use some old earphones and hook it up like that?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2