Post flatbed load photos here V2.0

It's hard too tell in that picture but it looks to close to the truck to be a bumper pull.

 

Lots of coils and chains but no weight!

 

Yay me, sitting here at the ta pembroke ny waiting for my next load, they inform me im heading to London Ontario to pick up a 56ft long 10ft wide tank going to our customer yard in Winchester Tennessee. The length puts me overall at 88feet long. Just 2 feet shy of needing rear escorts. I feel that parking is going to be a ##### on my way there

 

Sounds like a big deal... at least it isn't snowing through the area currently. Have fun.

 

Depending on your route I can give you some parking places. I from Texas to Toronto via Chattanooga at 16’ wide and 105’ long on a stretch double drop regularly.

Dundee Michigan on us 23. South of Toledo the ta at north Baltimore but it’s on the east side of the highway.

The ta in Florence ky just south of Cincinnati you can fit in the reserved spots and stick way out and not be in the way.

There are a few more if you keep heading south on 75 but I’ve never run 71 before.

Most of the rest areas you can fit in aswell.

 

#### WV permits say no parking at rest areas. Bunch of morons.

 

Ok @kylefitzy so im reading my Canada permit and according to it im allowed to use an oversize load banner. I thought OD loads were required to use the red and white banners in Canada?

 

No. Ontario, use the yellow and black oversize load banner, OR the red n white D banner.

Don't run your truck beacons, unless you need to as per your permits.

Where are you crossing?

 

You’re fine with the American “oversize load” banner in Ontario. Most of the rest of Canada you need the red and white “D” banner.