Post flatbed load photos here V2.0

When I was doing construction we did the dirt work on a walmart. the "manholes" for lack of thinking of a better term to call them at the moment were round concrete structures about 5 feet high and about 8 feet in diameter. We had a 330 volvo excavator that could barely handle the sections but with them loaded on a flatbed the machine ran out of lift capacity having to have the boom stretched out so far. we ended up unloading them in a similar fashion as you have pictured. hook to it with the hoe and lift the inch or two off the deck enough to get the forks of the loaded under it to help lift so the truck could pull up. once off the trailer the excavator could get closer to them and lift with no problems then.

 

Recent loads

 

13’8 wide. Have my rgn being used by a shipper for the week. So I had to grab my flatbed...this is some kinda base for some kinda pump...

 

Those ramp and dunnage racks are sweet.

 

Was that you driving today northbound on i85 in SC ?!

 

today's load to Providence, 30 ton. Yesterday's load was pretty much the same but a little bigger (41 ton) which I forgot to take a picture of...

 

This is a remote controlled boat, used for target practice. Somebody scored a hit. Both outboards were toast and the rubber cushion that would have made this an oversized load were melted off. Taking it to be repaired for the next Top Gun.