Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Lost

Discussion in 'CB Radio Forum' started by WREN, Oct 6, 2019.

Page 2 of 2
  1. Oct 7, 2019 #11
    wolverine11

    wolverine11 Road Train Member

    1,629
    1,234
    Apr 1, 2015
    0
    May also want to scrape the powder coating off on the underside of the metal plate where the antenna stud makes contact, I have found that it improves swr.
     
    wolverine11, Oct 7, 2019
    wolverine11, Oct 7, 2019
    #11
    WREN Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 7, 2019 #12
    WREN

    WREN Medium Load Member

    378
    239
    Jul 17, 2017
    Florida panhandle
    0
    Ok, where does the plastic washer go? Between the female adapter and base?
     
    WREN, Oct 7, 2019
    WREN, Oct 7, 2019
    #12
  4. Oct 7, 2019 #13
    buddyd157

    buddyd157 Road Train Member

    13,582
    34,896
    May 25, 2017
    under a shade tree
    0
    [​IMG]

    [​IMG]
     
    buddyd157, Oct 7, 2019
    buddyd157, Oct 7, 2019
    #13
    rabbiporkchop and slim6596 Thank this.
  5. Oct 19, 2019 #14
    rabbiporkchop

    rabbiporkchop Road Train Member

    9,681
    6,537
    Feb 9, 2012
    Wapwallopen, Pa
    0
    rabbiporkchop, Oct 19, 2019
    rabbiporkchop, Oct 19, 2019
    #14
  7. Oct 23, 2019 #15
    craig_sez

    craig_sez Road Train Member

    5,570
    2,714
    Sep 5, 2013
    novascotia,Canada
    0
    You what they say when you assume....
     
    craig_sez, Oct 23, 2019
    craig_sez, Oct 23, 2019
    #15
  8. Oct 23, 2019 #16
    Powder Joints

    Powder Joints Subjective Prognosticator

    7,950
    8,298
    Sep 25, 2007
    Rosamond, SoCal
    0
    Flip the switch from PA to CB
     
    Powder Joints, Oct 23, 2019
    Powder Joints, Oct 23, 2019
    #16
  9. Oct 23, 2019 #17
    WREN

    WREN Medium Load Member

    378
    239
    Jul 17, 2017
    Florida panhandle
    0
    Ok, so I have replaced everything brand new and still the same thing. Tested the ohms and that all checks out. Still not getting any movement on the set meter on channels 1 and 40. Channel 19 when I key up and adjust the set knob it will move to about 1.75 and when I flip the switch it drops to the bottom of the scale. I tested with my tips ran all the way down and then I ran them almost all the way out and nothing changed.
     
    WREN, Oct 23, 2019
    WREN, Oct 23, 2019
    #17
  10. Oct 24, 2019 #18
    WREN

    WREN Medium Load Member

    378
    239
    Jul 17, 2017
    Florida panhandle
    0
    Well, after all the BS I went through, it turned out to be a bad brand new radio.....
     
    WREN, Oct 24, 2019
    WREN, Oct 24, 2019
    #18
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

    • Page 2 of 2