The issue is that the flashers are ACTUALLY not working not just hte dash lights. We had it at a shop today, they pulled every related fuse and nothing was wrong, they replaced the fuse to the flasher 2x nothing happened. Then we tried to get the switch replaced, now THAT has been an adventure! Apparently ONLY can get the #### thing from a kenworth, and after calling every kenworth in a 400 mile radius I found one I can get a hold of tommorrow but they wont be able to install till monday because they are idiots... its 5 screws and a plug, its not hard, so we will do it ourselves. Four days for a 5 screws... I swear only at a dealership.
I will however try that trick to see if its the switch first, buts about where we stand now, its got to be. No left, no right, no hazards. though the flashing of the back lights button on the turn signal handle works (for 'thanks' when passing) and the highbeams work.
Blinkers/Hazards Not Working?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by IROCUBabe, Jan 7, 2010.
Page 3 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Maybe try a pete dealer , Here in the great white north west the pete dealers behave a lot better than the KW clowns Paccar sells parts to both
Wiring is hard to trouble shoot if you don't understand it and most people don't. I hope you get this solved
SOON
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 4