Big Loads - Post Photos Number 2

He had the room to be well north of 200k. That combination probably weighs close to 100k empty. Hell of a load though.

 

Cat says the operating weight for a 390D is 190k I imagine as that one is shown its 160k. Looks like hes at closer to 240-260.

13 axles should get him minimum 260,000lb.

That's probably why the arm and bucket are removed.

I could be wrong.

 

With 4 chains. He said it aint going nowhere.. he said it'll take some catastrophic ish to get that machine off the trailer. If im not mistaking it was a XL 160.. he also said the trailer was in the ballpark of half a million

 

If he actually said that and only had 4 chains on that load he’s an absolute moron. I notice he doesn’t have the boom secured so he’s probably a moron or at the very least complacent. Both equally dangerous.

 

Pick this up in Oklahoma city OK last summer.
(Btw picture before I chained down )

 

Na set it up with a linkbelt man it was hot in the field lol I was drenched by the time I got loaded

 

Derrick section loaded with a crawler crane on a oil field location

 

Replaced water pump and thermostats. Truck ran fine up until Monday. Started over heating again with no hot air into the cab. Basically the same in Nashville. It guys checked a few things and determine it's the head gasket. (To much pressure) They pull the head to find a bad piston, flakey cam, scorn sleeve. Boss sent to Cat to be rebuilt.

 

Borrowed a empty truck to load this 83k pound bridge deck for Newark NJ. It's 75 foot long so nothing hurtful. Well besides the NJ part.