Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

2005 9900ix Driver Door Replacement

Discussion in 'International Forum' started by springtown76, Mar 1, 2019.

  1. Mar 1, 2019 #1
    springtown76

    springtown76 Bobtail Member

    12
    5
    Mar 1, 2019
    0
    Looking for any suggestions on taking the drivers door off a 2005 9900ix. I have it all stripped down to just the door shell hanging there, but need advice with the wiring harness. Are all electrical connections supposed to go back out the one hole? Or is a person going to have to pull all the connectors off and get down to bare wires to feed the harness through. Any help would be appreciated!
     
    springtown76, Mar 1, 2019
    springtown76, Mar 1, 2019
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mar 2, 2019 #2
    boneebone

    boneebone Road Train Member

    2,297
    2,372
    Mar 13, 2009
    0
    You can feed the wires with the connectors back through the access hole of the door.

    The wiring harnesses are made complete with connectors by a outside vendor and shipped in bulk to the factory in bins to be installed on the assembly line, they are not individually wired on the assembly line, that would take too much time.

    Just feed the wires back through one at a time.
     
    boneebone, Mar 2, 2019
    boneebone, Mar 2, 2019
    #2
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.