Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

2007 Peterbilt 587- ABS

Discussion in 'Trucks [ Eighteen Wheelers ]' started by rasymacmac21, Feb 28, 2019.

  1. Feb 28, 2019 #1
    rasymacmac21

    rasymacmac21 Light Load Member

    291
    155
    Sep 25, 2009
    East of the Mississippi.
    0
    Bendix ABS Model EC-60 (5012226) ABS light is on. Blink codes show fault for Right Steer Axle sensor- Output Low at Drive-off. Sensor/adjustment, exciter ring/teeth are good. I even swapped connections to opposite sides and it's throwing the same code except it's for the Left Side Steer axle sensor. I checked the connection harness and wheel speed sensor measurements from the plug of the ECU to the wheel and they're fine. Would there be anything else to check before being out $900 to change the ECU? Thanks in advance
     
    rasymacmac21, Feb 28, 2019
    rasymacmac21, Feb 28, 2019
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Feb 28, 2019 #2
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,802
    1,763
    Jun 14, 2009
    romulus,mi
    0
    Excellent troubleshooting procedure. Are you using Bendix Acom program?
     
    QUALITYTRUCK, Feb 28, 2019
    QUALITYTRUCK, Feb 28, 2019
    #2
  4. Feb 28, 2019 #3
    rasymacmac21

    rasymacmac21 Light Load Member

    291
    155
    Sep 25, 2009
    East of the Mississippi.
    0
    I'm downloading it right now. Maybe the program will reveal more info because this is driving me nuts
     
    rasymacmac21, Feb 28, 2019
    rasymacmac21, Feb 28, 2019
    #3
  5. Mar 1, 2019 #4
    pushbroom

    pushbroom Road Train Member

    1,779
    7,311
    Sep 1, 2012
    0
    You are saying you swapped the sensor and harness from the RH side to the LH side?
    If it switches to LH side for the code it is saying something is wrong with the wheel end. Probably needs a new tone ring.
    If the code stays the same, it points to the wiring/ecm.
     
    pushbroom, Mar 1, 2019
    pushbroom, Mar 1, 2019
    #4
    spsauerland Thanks this.
  7. Mar 1, 2019 #5
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,802
    1,763
    Jun 14, 2009
    romulus,mi
    0
    Bendix has a great troubleshooting tree to follow. It is step by step and will lead you to the cause if you follow it properly.
     
    QUALITYTRUCK, Mar 1, 2019
    QUALITYTRUCK, Mar 1, 2019
    #5
  8. Mar 1, 2019 #6
    QUALITYTRUCK

    QUALITYTRUCK Road Train Member

    1,802
    1,763
    Jun 14, 2009
    romulus,mi
    0
    MEGA Sorry. This is the correct download for Bendix Acom software.
     
    Last edited: Mar 1, 2019
    QUALITYTRUCK, Mar 1, 2019
    QUALITYTRUCK, Mar 1, 2019
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.