I have a 2011 337 with a Bendix ABS system . I have a ABS light on indicating "DA left sensor" this is in the dash display. Hook a code reader to it and is giving me code SPN/791 FMI 14 which is a Webco code and not found. I replaced the L/R wheel sensor cleared code and it came back on .Rechecked OK OHm out sensor with in specs. Checked wires to Modulator are OK . So it should be OK ???? I was able to graph the response from all four wheel sensors while driving truck. L/R sensor is straight line no response. Im baffled any help greatly appreciated .Thanks in advance
Unfortunately you know what you have to do. Issue is in wiring harness between modulator and ABS module from what I can gather from your post.
Yeap or I was leaning towards the ABS ECM any Idea why it is showing a Wabco code. And Thanks for the reply.
Wabco, Eaton and Bendix all share code #'s. Your code is in fact for Drive axle speed sensor. Get the side cutters out and start snipping zip ties! Remember, don't rely on volt meter for continuity. 1 or 2 strands of copper will show continuity. Headlight with 12 volts the best way.
