I'm getting a Do Not Shift light and CEL. I pull the code and it's a SID0385 Accelerator Pedal code. I had a mobile HT mechanic come out and he said it was the sensor on the pedal. I went and got one and replaced the old. It worked great for a day. Lights were gone and code was clear. Started it back up yesterday after an oil change, lights and code are back. I'm lost here. Any help is greatly appreciated!!
Accelerator position sensor/Do Not Shift light
Discussion in 'Peterbilt Forum' started by Kensrig, Feb 23, 2022.
-
Attached Files:
Last edited: Feb 23, 2022
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
It's the short harness. I unplugged it and plugged back in.. lights/code gone. I pulled it back off and added terminal grease to the pins. Looking for a new harness but have not been successful. It is a flat 6 pin at sensor 134143 and square 6 pin at the harness. Pic is the correct harness but wrong sensor..
Attached Files:
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
