Another old bridge vs.Werner

Discussion in 'Trucking Accidents' started by Short Fuse EOD, Jan 19, 2016.

  1. Grumppy

    Grumppy Trucker Forum STAFF Staff Member

    3,232
    11,400
    Dec 11, 2010
    West Monroe, La
    0
    You know, I was gonna say (sarcastically) that, they put the "No Trucks" sign on the wrong end of the bridge! (see the pic from the article in the link) (Honestly, I figured there was one on the other side of the bridge too. She should'a known better)
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. STexan

    STexan Road Train Member

    14,963
    29,160
    Oct 3, 2011
    Longview, TX
    0
    For the new drivers ...
    ALWYAYS follow carrier or customer directions any time there is any doubt concerning a perceived "short cut" according to Google Maps or other GPS system. If there are no directions available ... always consider railroad crossings (high bridges or low underpasses) as a potential problem, and avoid if possible. Google Streetview can be your friend in most situations and when in doubt ....

    https://www.google.com/maps/place/Durant,+OK/@33.9540865,-96.4063291,3a,75y,125.94h,89.54t/data=!3m7!1e1!3m5!1s9JrlPyuIZwa34IxnLbUYsg!2e0!6s//geo0.ggpht.com/cbk?panoid=9JrlPyuIZwa34IxnLbUYsg&output=thumbnail&cb_client=search.TACTILE.gps&thumb=2&w=392&h=106&yaw=154.04323&pitch=0!7i13312!8i6656!4m2!3m1!1s0x864b5fd8af0f01cf:0xed0af14340b8a5f2!6m1!1e1
     
    Last edited: Jan 19, 2016
    tucker Thanks this.
  4. STexan

    STexan Road Train Member

    14,963
    29,160
    Oct 3, 2011
    Longview, TX
    0
    The "no trucks" sign is on both sides, but once you arrive at the north side and see the sign, you're kind of screwed. You look at the crown in the bridge and say to yourself "well, maybe" ... and once those landing gear pads hit and you're heavy and you we're going a bit too fast ... you're stuck. But, if you were wise enough to see the potential problem, you would have oh-so-slowly crossed, stopped, and checked clearance before getting hung up. Live and learn.
     
    bigkev1115 Thanks this.
  5. bigkev1115

    bigkev1115 Road Train Member

    2,364
    3,618
    Oct 23, 2009
    Alexandria, AL
    0
    At least the bridge did not collapse
     
  6. STexan

    STexan Road Train Member

    14,963
    29,160
    Oct 3, 2011
    Longview, TX
    0
    I know a few local sand haulers that cross that bridge every day on the way to the truck stop, and they run "Oklahoma legal".
     
  7. CasanovaCruiser

    CasanovaCruiser Road Train Member

    1,712
    2,669
    Jun 2, 2015
    Indiana
    0
    image.jpg

    3 weeks later we'll see a thread, "What do I do? Werner wrecked my DAC!"
     
  8. WalterSobchak

    WalterSobchak Medium Load Member

    577
    908
    May 16, 2014
    Rocky Mount, NC
    0
    Street view doesn't show a no trucks sign on the side it appears she was coming from. There is a very clear weight limit though. It does look on the left like there is an area to back in to or pull in and back out of to turn around.
     

    Attached Files:

  9. STexan

    STexan Road Train Member

    14,963
    29,160
    Oct 3, 2011
    Longview, TX
    0
    I wonder ... when in doubt, should one deflate the drive bags and try and proceed ... if they get hung up, then reinflate and see if that get you "over", or at least back? My way of thinking says this makes a little sense, but on the other hand, not so sure about the logic, considering for some, it will only delay the inevitable.
     
  10. tucker

    tucker Road Train Member

    12,647
    40,425
    Jun 13, 2008
    IN
    0
    She was so close,
    image.png

    I hope I never have to go to Jordan's truck repair on that road.
     
  11. STexan

    STexan Road Train Member

    14,963
    29,160
    Oct 3, 2011
    Longview, TX
    0
    There is a sign on both sides ("no trucks") but regardless, the obvious visible significant crown in the bridge "should" be a warning indicator to most experienced drivers ... or at least the drivers who have learned the hard way about just how low the landing gear can be in a road crown scenario.
     
    White_Knuckle_Newbie Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.