Have a ten speed Eaton fuller which grinds when I split from 5th to 6th gear. The other gears are very smooth, no grinding. Anybody got any suggestions on what might cause this?
e-fuller 10 speed grind
Discussion in 'Volvo Forum' started by Rudy5, Aug 5, 2013.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
R u flipn be.4 u shift if yes back box must be rebuilt
-
Yeah, I flip b4...is this black box rebuild costly?
-
no could be round air filter at rear back box. clog can slow change enough 2grind real trans shop not dealer best bet
-
Man, I would certainly check the splitter box or "Back Box" It sound like it may not operating correctly! I wish you luck.
-
Thanx, and that's the first thing I'm going to check on. I only hope that it's only that and nothing more stood and/or expensive.
-
I dont know what year make and model you have but you might want to look into the XY shifter that is located on the top of the tranny, we replace these frequently at the dealer. hope this helps
-
Okay, I'll have it checked out also. Is the replacement costly? Thanx for the information reply.
-
the XY is spendy around 600-700$
-
Yikes! Okay, then, I'll begin the checks with the least costly to the more expensive ones. Once again, thanx.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2