fan switch problem on fl80

been working on getting my ac cold this week and im just about there, vent temp at 38 *
im having a issue or two and was hoping for some direction , the fan switch was working on all three positions but the other day the high setting stopped ,
off , one and two still work fine,, i changed the switch out and the resistor but still no luck, i located the relay and swaped it out with another and nothing, any ideas?
the blower motor doesn't seem tight and i dropped a small amount of oil on the shaft while i was in there and she spins very well

kinda lost

 

thanks got it fixed this am the relay was bad and the relay i used to ck was bad as well shes good to go