Freightliner WABCO ECAS retrofiting

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Pablo-UA, Jun 14, 2011.

  1. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    The project is done, so I can post some pictures how did I do it.

    All components ready for installation, test and programming
    [​IMG]

    Level sensor installation
    [​IMG]

    Solenoid valve installed on frame crossmember
    I made adapters for stock air lines. So no any line I had to add.
    [​IMG]

    [​IMG]

    Control unit installed near ABS unit, remote controll like in European trucks.
    [​IMG]


    Adding ECAS Fault Lamp and ECAS out of level lamp to dashboard (auxially lamps are described in workshop manual)
    [​IMG]

    Level valve test and ride hight calibration
    [​IMG]
     
    Strider and beltrans Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. FancaR

    FancaR Bobtail Member

    1
    0
    Dec 4, 2012
    0
    Подскажи где брал софт и распиновку кабеля для подключения к контроллеру?
    Умер у товарища пульт (вода попала), пытаюсь победить его. Нет - дак с компа может быть зацепимся.
     
  4. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    Pin 2 - L line, Pin 4 - k-line. Use genue Wabco adapter.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.