Know Your Load Height
Discussion in 'Flatbed Trucking Forum' started by bigjoel, Apr 29, 2013.
Page 2 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Dump the bags and hammer down
-
dump the bags and he be riding the tires. and probably the ground too.
-
Wrong. Wrong, wrong, wrong.
There are some notorious places for mis-labeled bridges. Until the official report comes out, I won't be placing blame on the driver. They will measure his load, and they will measure the bridge, and if the bridge is mis-marked because some lazy DOT office jockeys couldn't handle getting a bridge re-measured and re-labeled following construction, than its not on the neck of the driver.
That's what the low-hole is for.7.3 cowboy and cetanediesel Thank this. -
ugh...that WAS THE NEW FAN i ordered to help with these blasted hot flashes...
.
-
That's so low.
Broadcasting from my HTC One -
Anyone that puts their oversize sign on in such a trashy manner deserves to hit a bridge
-
I looked over the news article. That bridge is the West Dallas bridge over I 45 in Houston. It's right smack in the middle of the city. If he had a permit, they would have sent him around the 610 (unless he was delivering that piece somewheres downtown). Nobody gets routed through 45.rusty2222 Thanks this.
-
first thing I noticed too, good indicator of how much pride a driver takes is if his signs are placed nicely.
-
Neatness=Ducks in Row, throw straps.......hang on I have to take them off the rachets or untie the knots ugh stresses me out just thinking about it
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 4