Speedo calibration

Discussion in 'Volvo Forum' started by Damage, May 10, 2013.

  1. Damage

    Damage Light Load Member

    67
    17
    Jan 13, 2012
    Newark, Nj
    0
    We are changing out tires on tractors from low profile to 11R22.5. They are 07 volvo with an eaton 10 speed and D12 engine. Anyone know what value to put in for the pulses per mile to make the speedo correct? Thanks
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. jimtx77

    jimtx77 Bobtail Member

    38
    2
    Jul 31, 2011
    [email protected]
    0
    I believe 497 is the number you are looking for
     
    Damage Thanks this.
  4. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    VECU, MID 144. U need dev tool to do it
     
  5. Damage

    Damage Light Load Member

    67
    17
    Jan 13, 2012
    Newark, Nj
    0
    Actually I set it up in VCADS. with Ratio of 3.58, 16 tooth output wheel, 501 RPM of tire(497 was very close it just varies a little from one tire manufacture to another thanks though)...the number needed to install was 28697 pulses per mile.
     
  6. jdmach77

    jdmach77 Light Load Member

    54
    9
    Jan 19, 2012
    New Jersey
    0
    I have the same situation i changed from low profile to 11R 22.5 and need to adjust the speedo don't want to go to the dealer any suggestions in NJ?
     
  7. Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    look for independent volvo guy)
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.