Trailer question

You will probably need to get a 5th wheel tailgate. Otherwise the bed shouldnt pose any issues that I am aware of. Tho the locals up here like to get a stake bed body and have saddle boxes to lock up their gear. Amazon offers some nice sluminum lockable boxes for about $100 each
https://www.amazon.com/Yaheetech-Al...body+tool+box&qid=1553289379&s=gateway&sr=8-5

 

I was looking at a small big Tex fifth wheel trailer to move stuff around and was told I needed to remove the box on my pickup. I passed on the trailer, but wish I didn't.

 

I do not know if this will work on your truck. It is not an original idea. Schneider had yellow reflective tape on the side of their trailers maybe 25 years ago. I asked why and was told when you look in the mirror stop before the yellow strip gets to the cab fairing. I laughed in my mind and thought non driver.
The girls , wife and daughter, drive this a lot more than me. I don't know or wasn't me pushed the cab fairing into the trailer rail a bit. Then I put the angled strips on the trailer. Just stop before they go out of sight. Just did it for the girls you know.
Pulled into a motel one night late. Time for a shower and a real bed. Wife called ahead for reservation. The entrance was very narrow and twisting. From the lay out I just knew it had parking in the back, wrong!
I really appreciated those markers while jacking around in a very small space.
Any trailer can be jack knifed into the cab of any truck. I have seen truck bed sides damaged from the trailer neck hitting them. I thank they had to be somewhere they should not have been.

 

I have TWO of the 20AC and pull them with my 16 RAM 3500 dually 8' bed just fine. You just need to be careful on an incline the top of the tailgate might hit the trailer

 

Not sure what pick up that is but it's pulling a loaded AC 20.

 

Looks like a flat Lander special to me. Not much room for error. Would never put a driver in that.
The strip works like this but the picture is not very good. I do not normally turn it even this close as it is hard on the axles.