We are setting up our first lowboy and need a little help. Recent purchased a Trail King Tk110hdg and need to know hydraulic unit requirements. I do plan on running a pony unit because we will use multiple trucks to pull it and most already have blower units on them. Really don't want to spend the money to equipment all of them.
What I really want feedback on is what size pump and pressure rating. The other question is how big of reservoir do I need. Thanks in advance for all your help and advice.
Wet Kit requirements
Discussion in 'Heavy Haul Trucking Forum' started by Poor boy, Feb 27, 2019.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
SAR, Grubby, snowman_w900 and 4 others Thank this.
-
SAR, Grubby, snowman_w900 and 2 others Thank this.
-
Thanks for response. I tried Trail King but have not received a response yet.
Oxbow Thanks this. -
Do you have a local dealer with a service department? Is so they can tell you what you need. Each trailer has different flow and pressure requirements.
SAR, snowman_w900 and Oxbow Thank this. -
Where about's are you located I have 2 complete pony unit setups off lowboys we have purchased in the past and removed as we run everything on wetlines.
-
-
-
One of the best things I ever did was throw the pony motor in the weeds and put a wet line on my truck . Won’t hardly start under 30° and after three or four drivers pull it it’s usually so jacked up it’s just a mess!!!
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2