stryker sr-955hp ANTENNA SETUP

Discussion in 'CB Radio Forum' started by kachup, Jul 19, 2014.

  1. kachup

    kachup Medium Load Member

    312
    305
    Oct 23, 2013
    0
    Got a wilson 5k, but honestly i got no idea how to tune it. My swr is 1.5 but as soon i speak it jumps to 3. Is this normal? Im getting frustrated with this radio because it has so many features that you simply feel like your not using it at its full potential.

    Any suggestion how to tune (calibrate) the antenna to these radio.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. MsJamie

    MsJamie Road Train Member

    Try turning down the mic gain.

    What you're describing is a classic symptom of overmodulation. If you're splattering signal outside the CB band, the antenna is reflecting the out of band signal back to the transmitter, which shows up as a higher SWR.

    My bet is that whoever "tweaked and peaked" your radio disabled the limiter.
     
    rabbiporkchop Thanks this.
  4. kachup

    kachup Medium Load Member

    312
    305
    Oct 23, 2013
    0
    is that a good or bad thing? sorry for my ignorance.
     
  5. MsJamie

    MsJamie Road Train Member

    It's a bad thing. If that is what is happening, it means that whoever did your "tune up" screwed up your radio.

    The sad part is that most "radio techs" have no real idea of what they are doing; they're just following a guide they found on the Internet. Just listening to all the bad audio on channel 19 nearly makes my ears bleed.
     
    rabbiporkchop Thanks this.
  6. kachup

    kachup Medium Load Member

    312
    305
    Oct 23, 2013
    0
    Thanks for the info, Ill be contacting the tech on Monday.
     
  7. vampirtroy

    vampirtroy Bobtail Member

    9
    0
    Jul 24, 2014
    0
    you can contact the support center of stryker radio they can help you for you antenna setup
    here is the support center for stryker radio website link which i get it from stryker website support@strykerradios.com you will contact them to solve you problem easily.
     
  8. craig_sez

    craig_sez Road Train Member

    5,457
    2,649
    Sep 5, 2013
    novascotia,Canada
    0
    Horse pucky..I know its an old thread but still horse pucky
     
  9. Dirtymartini15x

    Dirtymartini15x Light Load Member

    180
    114
    Oct 18, 2016
    0
    I know it's an old thread but I'm wondering if he's using the automatic SWR feature on the radio or an acutal SWR meter to get his readings? My 655 shows a 2.0:1 but when hooked to my external meter it is a 1.3:1 and will climb to 1.4:1 under 100% modulation.
     
  10. craig_sez

    craig_sez Road Train Member

    5,457
    2,649
    Sep 5, 2013
    novascotia,Canada
    0
    I just tried that same thing on my new 955's meter..Didnt budge from from lowest to highest power..No patch cord to try it with my dosy meter..
    Shouldnt move anyways..
     
    rabbiporkchop Thanks this.
  11. Dirtymartini15x

    Dirtymartini15x Light Load Member

    180
    114
    Oct 18, 2016
    0
    Mine does, it starts at 2.0:1 and will pretty much peg the meter. My "power meter" on the radio also max's out when in reality it's not even doing 60 watts PEP.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.