Oh, you told them it could be a sensor, well there's only about 2 or 3 sensors on a Cascadia,right? Shoulda just swapped 'em out and sent you down the road.
HELP: Cascadia check engine lights
Discussion in 'Freightliner Forum' started by Rich_Trucking, Mar 25, 2013.
Page 2 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
To find your codes (if you have a problem in the future)
theres a rubber reset button on the dash by the air guages.
Keep cycling thru until you see the codes in the screen where you see your mileage etc
it'll have a few different screens like
ECU 128
pid 411
fault 1
fail 13
and no it wont work the same with the + button on the wheelBella77 Thanks this. -
Did this fix your problem...
-
i have 2013 cascadia dd15 getting check engine light with ecu 0 and sfu 49 flashing any ideas what this is?
-
My 2014 DD15 Evo has flash codes still.
Sent from my Nexus 4 using Xparent Cyan Tapatalk 2 -
I actually had mine in the shop twice now, if the codes are not active, the KC Freightliner by 435 doesnt give a ####.
-
EEC 061 SPN003720
DPF Ash 15 -
2013 Cascadia
-
At least it's throwing a code. When you have problems and there is no code to tell them what's wrong then you are in trouble.
-
see this
View attachment 3720.pdf
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 4