i'm running a S60 ddec iv 12.7L and i want to intsall a pyrometer/egt guage where is a good place to install the probe for the pyrometer/egt?
pyrometer/egt install
Discussion in 'Freightliner Forum' started by truckerbangin, Jul 16, 2013.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
4 inches after the turbo in the down pipe.
Rawze Thanks this. -
Do you have a boost gauge? That would be a much more helpful / useful addition if you don't have one already.
Rawze Thanks this. -
As said, @4" down from the turbo on the "S" pipe on the exhaust side.
Remove the S pipe, drill the hole for the bung, weld in the bung, refit pipe, insert sender unit, wire in.
If you also need a turbo gauge, get a mechanical one and fit the hose to one of the blanking plugs in the intake manifold.
Martin -
most stock freightliner fld120 and classic you will find the pyro needle mounted in the turn pipe off the turbo. freightliner finally after years of begging sells a kit with the gauge needle wiring mounting nut for easy install in a fld or classic. hope this helps
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.