OK, so here is my issue. I have a 99 Pete 379 with a cummins n14. I have replaced the backup light switch and i am still getting no power to it. I need help, is there a fuse or something i am missing here. I am about up the wall with this. Any help would be greatly appreciated.
backup lights...DEAD!
Discussion in 'Peterbilt Forum' started by bigdawgtrucker51, Jan 8, 2015.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
most OEM's share power to the back up light switch with the air dryer heater power.See if you have 12 volts at 2 pin harness at air dryer.If not,you are on the correct path to repair.good luck.
-
and if i do have power at the air dryer then what? and if i don't is there a fuse?
-
I just went through this with a 2008 388. The reverse light power came from a fuse marked "Spare Accessory", so make sure all your fuses are in and good. On that particular truck, someone pulled the fuse out for whatever reason. When I put the new one in, it was fine.
-
all right i will check all the fuses this weekend. anyone else have any suggestions?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.