Trucking Jobs New Driver Jobs Flatbed Jobs Tanker Jobs Refrigerated Jobs Auto Hauler Jobs
Page 4 of 4 FirstFirst ... 234
Results 31 to 32 of 32

Thread: tandem sliding

  1. #31
    Trucker Forum STAFF
    Member Since
    Sep 2006
    Location
    the road less travelled
    Trucker?
    10 Years
    Posts
    10,162
    Thanks
    11,329
    Thanked: 7,206 Times
    Air operated pins only can be retracted when the spring brakes are set(red knob pulled), and as soon as you supply air to the trailer supply, those pins are supposed to extend back through the rail, so you can't drive with the pins retracted(pulled). I had one trailer where the pins stuck in retracted position because they were misaligned, hitting the end of the pin with a heavy bar was the easiest way to get them to pop out.

    Sometimes the spring brakes won't hold it to slide, and then you look for a way to block it. Sometimes applying the brakes with the trolley valve several times to adjust the slack will help but not always Heavy duty metal chocks would be nice, but sometimes you end up using somthing large and heavy on both sides to get it to slide.

    I have a pin puller from a previous job, but it is made to work with pins pulled with the straight handle, and none of the trailers I pull now work with it. I could use it if I had a way to pull up with it instead of out, but I haven't had a reason to figure that out, yet.

    Road debris, particularly sand, makes the slides really diffficult to move even after the pins are pulled. It may not be rust, just saying. Two pedal autoshift is also difficult to slide tandems with.



    I have pulled spreads but the reefers we pull don't have them.

  2. #32
    Medium Load Member I am medicineman's Avatar
    Member Since
    Jan 2011
    Location
    marion, ms
    Trucker?
    12 Years
    Age
    48
    Posts
    401
    Thanks
    696
    Thanked: 528 Times
    Quote Originally Posted by Freebird135 View Post
    some slides are so poorly designed....alot of our trailers dont have a groove or anything for when you pull the pin release handle out, so you have to get another driver to hold it out while you back the truck up/pull it foward to slide the axles

    i hate when engineers design things they never have to use

    Rubber "tarp strap" from handle to siderail of trailer will hold tension on stuck ones til the pins "pop loose".

    As said, vice grips on the shaft to hold it "open" while you slide.

    Sure helps when you are on back of a DC lot and noone else is around.

Page 4 of 4 FirstFirst ... 234

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •