He's doing that so you can haul those 46000# loads.
Sent from my Nexus 4 using Xparent Cyan Tapatalk 2
Cascadia cruise not working.
Discussion in 'Schneider' started by ethos, Mar 11, 2013.
Page 4 of 5
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Girl, I know you want this $$$$. -
Girl, I know you want this $$$$. -
This actually worked for me. 2013 cascadia
-
Make sure you have hit the brakes and the clutch at least once and make sure your retarder is off, then turn the cruise on.
-
Do your jakes work by chance?? My last truck was a new cascadia no cruise no jake, found out the hard way coming down some mountain in the west. -
Wow, finding this old thread took dedication. The truck was brand new and the cruise control had been disabled, maintenance turned it back on and it worked like a charm. But I haven't driven that truck in over a year.
-
I'm in a 2015 cascadia that does this to me all the time. Reading this post helped me alot as I needed to engage the clutch and brake at least once while rolling when this problem occurs and the cruise would then engage. And my 2015 has a battery cut off switch on the floor to the left of the driver seat.
-
When the onguard system has an error it will usually kill the cruise. Sometimes you can get the cruise back by cycling it on, off, then on again before you set a speed.
-
Or, sometimes, as the OP stated, they just didn't set up a new truck right and had cruise disabled.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 5