Had a similar issue. I would turn the key and hear a click-no-crank symptom. It would take a few tries before the truck would fire up. At first I...
check your battery terminals. make sure that they're clean and making good contact. I'm not saying that this is the culprit, but only that it's a...
Just curious Speedi235, how exactly did you go about finding the short? I like knowing how people go about solving their electrical issues, since...
Is 270 a celsius figure? ...because that's 518F
I just replaced my unloader piston. Basically, in order to combat the vacuum you have to remove the airline to the unloader port. This will allow...
Hmm that is weird. (Thanks for the clarification). Have you also checked your secondary fuse panel? I don't know much about it, but I can't think...
Yes, on the series 60 there are two thermostates located in a housing that your delta p sensor sits on top of.
Unsure if yours operates the same way, but recently while diagnosing and changing out my starter I noticed that once I disconnected all my battery...
Just follow the air line from the actuator to the vpod. It'll be near the oil cooler.
Actually, mhyn, that's the code for low level left rear blinker fluid.
I had this same exact issue. It turned out to be the marker interrupt switch. It was sticking. I made a thread on how to fix the switch or you can...
Also, if you know the model# of the component you're looking at you can download a manual from the Bendix site I believe. I think most of the air...
Thanks Tanktrux. I finally got that booger out today using a method similiar to your own. I'll be creating a tutorial after all is said and done....
I've yet to come across something that you're looking for. My best advise is to simply take a picture of what you're working with and maybe some...
It's not the solenoid Skate. It's definitely air escaping from the fan hub/clutch even though I can't 'feel' it. Grape, it's a Horton. Much to my...
Update: detached fan belt and detected no bearing play and it seems to spin freely/smoothly. Unhooked solenoid and the sound stopped! :D ...so...
Yeah, I didn't think it was my fuel pump either. It's mounted to my compressor and looked mechanically operated. Thanks Skate and Grape. I'll...
Quick question, if it was the air line to the fan clutch wouldn't I hear air escaping regardless if I had the key on to acc position? The noise...
315, that's hard to determine. My engine is pretty loud when running. The noise I'm describing gets drowned out.
You'd think that the dealer would've already done the wiggle test lol