You have to remove the rocker arm bolts and change them from memory to install the Jake bridges you have to position them properly. Then comes...
The first thing I would be checking is the fuel pressure and the CAC. Bogi may very well be correct you can test the pressure sensor when testing...
Taking the sulfur out of the fuel changed nothing, except the damage caused by the sulfur build up breaking loose and damaging the turbo, and...
Antifreeze lowers the boiling point of the coolant, 55% antifreeze and a 15 lb cap gives you a boiling point of 243 degrees. Water even under...
You have to give as much information as possible, year, type of truck, manufacturer, type of engine. The more you give the better the advise is.
If a paper filter fails from manufacturing defect it will cover downstream damage, the washables do not. I worked on two trucks that had...
I always fill the filter from a jug, if the jug is clean and filled with clean fuel there is no problem. I have seen many a Cat that when they get...
Using tubing I would worry about it crushing and the bolts coming loose that would be a rejectable condition and if the tubing is distorted that...
I have been to a lot of Cat courses at Cats School and whenever the Damper came up bouncing it on the tire was the way he said to test it. The...
Cat Dampers, to test remove it and bounce it on the tire if it rattles it is junk other than being bent it is good to go, the Damper does nothing...
First off you want to clean the battery cable connections and every connection to the starter, alternator, and block, also to the cab. Then with...
You also have to watch the old trucks had muffler problems were the muffler baffles would break loose and rattle up restricting the exhaust
You could always call Cat with your serial and arangement number, and get the correct answer over filling the oil level costs you a lot of...
If you have access to a program the oil pan capacity is on the last line in the engine parameters section, you have to watch Cat put a lot of...
In heavy applications 15/40 works the very best, we found that out in the twin steer cement trucks. also a common problem with a system...
You really want to look up who it was that passed the 2007 and 2010 EPA laws in 2004, now who was in control of the senate house and president....
I rebuilt engines for a living and would never use synthetic oil on a fresh rebuild, I use to recommend the oil filter be changed after the first...
I am not a gear man but worked with some of the very best, a 10 speed is great for flatlanders, a 13 is great for highway, under 90,000 lbs, and...
The spinner is a great addition to the filtration system, as far as cost it is cheap, 2 "O" rings and a piece of paper. You need to mount it so it...
Years ago GM had a system that was suppose to bleed off any air to the system off the secondary system. This was in the 1970's, they was so...
