I work for one of those big companies. Profit margins are razor thin due to increased overhead. I mean thin like 3 percent profit. Tax writeoffs...
Seriously a 6 degree shim?? If you needed that must of a castor change you have a bent axle or the tech/ machine was hosed! A 2 degree castor...
Lets take this apart. You put brake shoes on this truck and now the brakes lock up on one wheel. You swapped service lines side to side and it...
These are cake for me. I've done maybe 30 of them in the last 2 years. Tip1 remove the speaker from the dash on top (2 screws after you pop the...
Umm wow. Oil can and does burn. It is transported as a Class D ORM substance. Read your orange book.
If your truck came with GROTE lights and you switched to the trucklite bulb it will set of the brake light code. All body coding has to be done...
What generation of tri pak? there's been at least 5 generation and that means differences in wiring. It would be better for you to go to the...
Uhhh, a good tech jacks each wheel up and rolls it to make sure that isn't a problem....and you would not believe how many drivers ask what I'm...
If you call the shop screaming that your engine is locked up and won't turn over when you try to start the truck. Check to see if you left the...
Some use air to release and others use air to lock. Some also have the ability to be locked on by screwing bolts into them. Cummins uses the ECM...
Folks read this several times. Way to many "techs" don't understand what is said here. This is how and why you check for a backfeeding chamber...
I should add that type of road driven comes into play. Lots of flat interstate is easier to get higher miles out of because the forces on the axle...
Thats a test port on the discharge line is to check for pressure from the compressor. Most volvos use a meritor/wabco drier that has a spin on...
Bypass the drier first and see if its plugged
Well it could be a wastegate controller. Or a Delta P sensor (but not likely). Or a boost sensor but again not likely. Diagnosing this problem on...
The tank closest to the front tire is the wet tank. There is a pull cord for the drain valve on the back side of that tank. the drain valve on...
Thats a good trick. Remember one thing its almost a guarantee to kill your air drier desiccant cartridge. And if that spews those little beads...
Use a 1/2 hose not the 3/8 one
Experience with that model leads me to say its a 90% chance you need a new sending unit. Rare that the gauge has died. And its only 5 screws...
Change out the window holder and rivets on the bottom of the glass. Its like a 30 dollar part. for 200 bucks you can replace most of the parts...