If you have a pull after an alignment, then I'd suspect that the alignment was nfg. If you have steering components that were bad, an alignment...
The kind of jump starter you're thinking of does not have the capacity for your truck. If you're in a position where you will be starting a cold...
GrapeApe's suggestion of a noise suppression capacitor makes the most sense. The truck battery acts like a capacitor but doesn't filter (smooth)...
Hi barroll. Yeah I looked over those, the problem is the 28" tank dia (not as common as 24) and the built in step brackets. I saw the deals with...
Hi. The tanks are 150 gal - 568 liters, about 28" dia and 63" long. My straps are 4" wide, 1/8" steel and at end of life. They are badly...
Thanks for the update. I was almost sure it was your clutch. Not very common that a tranny fails progressively and slowly from the top gears...
The beads will rule out the tires, and won't be too costly to do. If you have more than one tire/wheel out of balance and they are slightly...
This is good advice. Go to court and the only parties smiling will be the lawyers, no matter how right you might be.
If the clutch is engaged (depressed) all the time, you can move into any gear with the engine running, plus the output shaft will not turn. Did...
Might have to upgrade your driveshaft to an 1810 series to use all that torque.
Sounds like the diff needs some work, but think you lost your clutch adjustment. Maybe your clutch is at the end of its life or was adjusted...
Wish I could offer you some help on this issue as you're always helpful to me and others. Did you make any progress on this?
He got back to her and this was the problem, the foot brake valve wasn't functioning properly. On the Sterling the valve is floor mounted and he...
Shake my head wondering why they think using a torque wrench is beyond the ability of an owner operator. Try another dealer. Information should...
Was wondering if your rims and tires different than the originals and making the outside bearing carry more load than the inside?
Dunno exactly, but not always a counterfit issue either. I hear you can't go too far wrong if you ensure the bearing or substitute is North...
Good link, site answered my questions.
Check that the metal holder is not bent or damaged. There are some styles of air bags that are plastic with brass threaded inserts that couple...
This is what I was thinking. It happens on other types of lighter vehicles too. Dually trucks, dually trailers with electric brakes, etc. I've...
Thanks again. If it were me, I'd prefer one without ABS and all the extra stuff that can go wrong. I'll check out the truck and get back with...
