Im looking to buy some power harnesses for a 1994 pete with the 3406 E motor. Can someone tell me where the boost sensor and also the fuel temp sensor is? It seems to be considerably different from later models.
Power harness for 1994 3406e
Discussion in 'Trucks [ Eighteen Wheelers ]' started by TA63, Dec 9, 2010.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Now the problem is is that both these locations will have a three wire sensor in them...........you need to determine that you are looking at the boost sensor and not the Air Intake Temperature Sensor when you decide to hook the boost fooler up to either of these sensors. The Air Intake Temperature Sensor will have 3 wires also, but they will point straght out the side of the engine towards you. The Boost Sensor will be able to be un-threaded from the 90 degree elbow, while the Air Intake Temperature Sensor threads straight into the head.
If you're interested in purchasing this, I build them to sell. PM meramblingman Thanks this. -
Thanks Mr. Haney. Its a friends truck and I am not overly familiar with it. We will def get the harnesses from you. Where is the fuel temp sensor? On the later models it was on the engine mounted fuel filter housing. I cant seem to find one on this early engine.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.