Chinese 9998555 adapter with vcads???

Thank you, Pablo.
I hope you and your family are safe.

 

hi,pablo.i am armin from bosnia and hercegovina.please help me.you are expert for truck electronic.i have problem .i have super volvo vcads for volvo truck,bus,and construction equipment(dark-white,with 3 led.with hard disk and dongle ).obdauto.com is seller.i try conect volvo truck fm(2007 year),construction equipment (2007 year) but comunication dont work.chinese send me second interface but again not work.pablo ,i am electronic tehnician but i dont no what is the problem.connection stops at 10% of loading. Chinese suport is not good. What should i do. Can you tell me is the diagnostics ok or should i send them back? In your opinion what is the best diagnostics for volvo trucks and construction equipment?

 

I have a 2015 730 with a d13 and I shift.
What do I need to access my parameters to change the shifts, speed, rewards system?

 

Hi Pablo, Do you know if this product http://www.simmasoftware.com/j1939-adapter-j1708.html would work for my 1995 Volvo d12a. I finally got this truck started but I have no throttle pedal(tps switch) response. So I am sure the best way to proceed from here is scan it. Let me know if you think that scanner may work for this purpose. It seems to be a reasonable price and I can use it for other trucks than just Volvo's. I very much respect your opinion. Thank You

 

not, but copy of Volvo adapter works, but I started my project of copy of 9998555 and I tested it on D12A, D12C, D13 and D12D.

It works well, really well.

So a bit later I wanna make a small party of adapters for sale

 

The first reason is that D12A wont supporting J1939, only D12C and later.

For diagnostics Volvo uses only datalink (from 1998 J1708/1587). J1939 is used as truck CAN, but not for diagnostics.

 

The brochure says it supports j1708/1587. Isn't that what I am looking for?
So then do you reccomend I buy a vcads pro or a 9998555?

 

yes, but IMO chenese copy is too expencive, so I staterd my project.

http://www.thetruckersreport.com/tr...tarting-new-project-volvo-diagnistics.288997/

Pay attention, that D12A datalink is not J1708, It differs a bit, no module ID.

Full SAE compatible datalink and CAN appeared in 1998. Pre 98 volvos differ

 

Ok so do you have any of those adapters for sale?
If not then does the 9998555 adapter or the vcads pro work for the d12a?

 

really the only one is done

other is just board, I can put all parts on it but I need some tome to complete one more adapter