2007 Volvo Cummins ISX fan turns on with no reason. Can help anyone please.

Discussion in 'Volvo Forum' started by PITBULL777, Feb 28, 2013.

  1. bubbanbrenda

    bubbanbrenda Road Train Member

    1,388
    649
    Feb 27, 2011
    Middletown,Oh.
    0
    I would take it right back to the shop that has my 6500.00 and tell them I expect a whole lot better for 6500.00. Its pretty obvious they missed something. Its only been 4 days I'd make them make it right.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. chopov78

    chopov78 Light Load Member

    122
    9
    Feb 27, 2010
    illinois
    0
    wait,no worries,same thing happend to me 3months ago,simple,i have ISX,2007,500HP,anyway ,just change the temperature sensor on the top on the INTAKE MANIFOLD(on the driver side).there two sensors temp. and pressure sensor,change the temperature sensor,wich is the smaller one,also there is a sign saying" temp"on the manifold.it is gonna cost you $22.00.cheap .
     
  4. PITBULL777

    PITBULL777 Bobtail Member

    22
    0
    Feb 28, 2013
    Schaumburg, ILLINOIS
    0
    Hi bubbanbrenda. I called the shop. The owner is friend of mine. He told me to bring the truck back, but i dont want them to look for the problem for another few days. I have to make money. Thanks.
     
  5. PITBULL777

    PITBULL777 Bobtail Member

    22
    0
    Feb 28, 2013
    Schaumburg, ILLINOIS
    0
    Hi chopov78. Do you know the part number of the temperature sensor? I have changed one of them before. But i had different symptoms. Fan was turning on also but i had no power at all and black smoke from the exhaust. After replaced the sensor / i dont remember which one but cost me about $80/ it was one of the 3 sensors on the top of the engine. The biggest one. Thanks
     
  6. chopov78

    chopov78 Light Load Member

    122
    9
    Feb 27, 2010
    illinois
    0
    i can't find the serial number,but this sensor is on top of the intake manifold,driver side,there are only two sensors bigger and by him there is a sign press(pressure),and smaller(in diameter)by him sign temp-the signs are stamped on the intake manifold by the sensors,you have to change the smaller one "temp".Open the hood get up on the driver side tire and look a little bit righr it is very clear thay are not hided betwin wires,there is nothing around them,they are only two of them there.
     
  7. PITBULL777

    PITBULL777 Bobtail Member

    22
    0
    Feb 28, 2013
    Schaumburg, ILLINOIS
    0
    Ok thanks a lot. Im going to change this sensor tomorrow. I hope it will help :) I'll let you know
     
  8. chopov78

    chopov78 Light Load Member

    122
    9
    Feb 27, 2010
    illinois
    0
    good luck,if i find the serial number i'll post it
     
  9. PITBULL777

    PITBULL777 Bobtail Member

    22
    0
    Feb 28, 2013
    Schaumburg, ILLINOIS
    0
  10. chopov78

    chopov78 Light Load Member

    122
    9
    Feb 27, 2010
    illinois
    0
    i found the receipt,the part #4088832 M4I
     
  11. PITBULL777

    PITBULL777 Bobtail Member

    22
    0
    Feb 28, 2013
    Schaumburg, ILLINOIS
    0
    Thank you. It will help :)
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.