I VAVE VOLVO 04 W/VOLVO ENGINE 465, WHEN I PUSH THE BRAKE PEDAL, TRAILER DOESN'T BRAKE. THE RED BOTTON IF I PRESS, IT NOT SEND AIR TO TRAILER'S BRAKE. I REPLACED AIR VALVE UNDER CAB (WHERE IS CONECTED BRAKE'S HOSES) AND NOTHING. ANY IDEA?
tHANKS, WALTER
Brake problem
Discussion in 'Volvo Forum' started by waltherz, Mar 23, 2014.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
CK. trailer protec. valve at end of lines at rear of sleeper to see if air is back there yet?
-
I replaced. When i press the red boton isn't send air for release trailer's brake. Trailer still blocked until air get 120 psi and then it release the trailer's brake.
-
Trailer protection valve is at the rear of sleeper before air lines change over to the plastic flex lines, ck. if air is back there before it gets to 120lbs.
-
I'll check again with low pressure. When i replaced that valve, before to conect all lines, i press the red boton and air get there. But after conect all lines, the air dosen't pass thru the valve to the red hose.
-
It not the vavle in dash you need to CK. but the one at rear of lines under sleeper
-
tHE REAR LINE'S VALE IS NEW. DO YOU THING DASH'S VALVE IS FAILING?
Last edited: Mar 23, 2014
-
Sorry does red button pop out at low press. if not it needs new one, they can go bad.
-
? did you use a reconn. air valve when you replaced trailer pro. valve, might be bad out of box
-
Yes, both button pop out w/ low pressure.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2