|
Turning Radius Info On Eighteen Wheelers
| |
Turning Radius Guidelines
|
|
|
|
|
|
| |
Turning Radius Guidelines for Trucks
The truck shown is a standard truck used by CXT Incorporated. The
information below will help you determine if your building will make it to
your site (special arrangements MUST be made for Double Cascadian and
Double Cascadian with Chase).
Standard height of building on the truck is 13'6". If you have low power
line, bridges, tree limbs, etc. please call the Logistics Coordinator at
800-696-5766 for special arrangements. Standard widths change on each
building. Please refer to building dimensions for widths.
|
|
|
 |
|
|
|
| |
 |
|
|
|
|
| |
|
|
|
Turning Radius
If your road has tight corners use these steps
to help determine if we can access your site with a standard truck.
Step 1 - Determine angle of the corners and road width requirements.
(see diagram and chart).
If the angle falls between two of the angles listed, use the larger
angle.
Step 2 - Measure road width.
If your road width is equal to or greater than the width listed on the
chart, the truck will be able to reach your site.
If your road width is less than the dimension listed on the chart please
call the Logistics Coordinator at 800-696-5766 for special arrangements.
This information was developed through the CalTrans Design Manual. If
there is any doubt please call CXT for assistance.
|
|
|
|
|
|
|
| |
|
Turning Radius Chart
|
|
Maximum Angle Minimum Road Width
|
Minimum Road Width Requirments
|
| 30° |
16' 6" |
| 60° |
24' 6 |
| 90° |
27' 0 |
| 120°
|
27' 0" |
| 150° |
35' 0" |
| 180° |
33' 0 |
|
Are you a highway
designer or lawmaker?
Want to know what we think of the roads and laws?
Click
Here
|
|
|
|
| |
|
|
| |
Trucker News
Sponsored Links:
|
|
|
 |
|
|
 |
| |
Free Trucking E-Mail
Here
you@
licensedtrucker.com
keepsontrucking.com |
|
|
|
|
|
|
|
|
