Fifth wheel height.

Standup rubber, 24.5” rims

 

go to. machine shop they’ll raise fifth wheel with steel drill it and remount with steel between fifth wheel and frame

 

Yes, they cut me a square steel tubing and had holes measured and they drilled them out.
Truck still like that 15+ years later, old truck i drove years ago

 

Many O/O will run 22.5 tires with low pro rubber. 24.5s with standard, or standup tires will sit higher, so will buy several inches of height. Probably not the most practical option to switch, fifth wheel could be remounted, or replaced as was mentioned above. What do you pull, tank?

 

We’ve got a set of those fabbed risers we took off a truck years ago, they’ve been collecting dust since they were taken off. If you are interested I can get you measurements and a pic tomorrow, I’m certain they were for a holland frame- if nothing else a pic might get you an idea what they need to look like

 

11r24.5 outer diameter is 43.4” mostly
275/22.5 is about 40”

that’ll gain you 1.75” nominally


Might go with a taller stand/riser underneath the 5th wheel plate as another option. Prolly cheaper than both alternatives offered if you labor it yourself by a bunch.

fleetpride or another parts house ought to have a few options if you check with them on heights available.
I just changed my fixed fontaine stand from 10” to 6.25”

/// its setting in the bed of my pickup I’ll put a picture here of what you’d be looking for