Safe or Sorry?
Discussion in 'Ask An Owner Operator' started by JonJon78, Jul 18, 2020.
Page 1 of 4
-
blairandgretchen, Rideandrepair and 4mer trucker Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Run it !
Diesel Dave, stwik, rifleman308 and 5 others Thank this. -
I’d run it and see how it wears.
Diesel Dave, rifleman308, Rideandrepair and 2 others Thank this. -
I've pulled trailers that I would have celebrated had a single tire on the trailer looked as good as that one does.
stwik, rifleman308, Rideandrepair and 1 other person Thank this. -
(b) Any tire on the front wheels of a bus, truck, or truck tractor shall have a tread groove pattern depth of at least 4⁄32 of an inch when measured at any point on a major tread groove. The measurements shall not be made where tie bars, humps, or fillets are located.
(c) Except as provided in paragraph (b) of this section, tires shall have a tread groove pattern depth of at least 2⁄32 of an inch when measured in a major tread groove. The measurement shall not be made where tie bars, humps or fillets are located.88 Alpha, Rideandrepair and JonJon78 Thank this. -
Ahhh that's nothing man, I'd run it. As long as that outer line on the tire exists, and you haven't got to the second layer, you're good.
rifleman308, Rideandrepair and JonJon78 Thank this. -
have one on the trailer now. been on it for a year now
Rideandrepair and JonJon78 Thank this. -
Spray some glass cleaner on it to make sure it’s not leaking.....if not run it .
rifleman308, Rideandrepair and JonJon78 Thank this. -
Rideandrepair, bzinger and JonJon78 Thank this.
-
D.Tibbitt, Rideandrepair and 4mer trucker Thank this.
-
What position is it in ?
Rideandrepair, 4mer trucker and JonJon78 Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 4