Is there such a thing?
Google isn't helping.
Got one pipe to load. I'm looking to keep the overhead load hooked up. Slower. But I want to be able to vacuum load also. Faster.
Some of our trailers are gravity. So those guys need to overhead load. Mine is vacuum.
A way to close off one or the other. Depending on who's loading. Both outlets aren't open.
Hopefully a way to suck air to clean out the hose before disconnecting. So you switch the valve from vacuum to close it off and back over to the pump for overhead. Open another valve to suck in air.
All I'm finding is the standard in and out valve. Open or close.
Looking for a 3 way valve. 3 inches. 1 in-2 outs.
Discussion in 'Tanker, Bulk and Dump Trucking Forum' started by snowwy, Feb 28, 2021.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
3-way Industrial Brass Ball Valve | Dixon Valve US | World Class Customer Service
something like this? -
Yes sir. Thank you.
Looks like diverting is what I need. -
Mountain States Supply in SLC
May want to look into PVC valve.
Brass aint cheapsnowwy Thanks this. -
-
Class 300 PVC will handle 700psi -
- No idea on pressure. They got 2 pumps. My trailer is 7000 gallons. 1 pump fills it in 35 minutes. The other spare pump is way slower. It don't spin as fast.
As far as me sucking. It's the same time as the faster pump.
GPH is about 12,000. -
-
-
-
So whatever you do it must be food grade ?
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2