When I was in the oilfield, I was headed to the yard about 2am in my company pickup. Just a regular 1-ton Dodge Cummins single wheel. Cop pulls me over. Walks up to my window. "You know you don't have any license plates on this truck?" I said, "There's an apportioned plate on the front."
He took my license and registration, and went to his car for about twenty minutes. Comes back: "I thought apportioned plates were only for semi's. Drive safe." He never even walked to the front of my truck to look.
We're expected to know the law perfectly. Not just professional drivers, but all people operating any motor vehicle. Why? Because ignorance of a law doesn't get you off the hook. Meanwhile, the people supposed to be enforcing these laws don't even know the law...
All it is, is a racket.
What exactly is the steer axle weight limit?
Discussion in 'Questions From New Drivers' started by 1nonly, Apr 26, 2010.
Page 15 of 17
-
Cowboyrich, Hammer166, not4hire and 3 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
SoulScream84 and God prefers Diesels Thank this.
-
The operative phrase is "while being operated on the highway " and " continued in operation".
Combined with " Such operation shall be conducted only if it is less hazardous to the public than to permit the vehicle to remain on the highway."
Basically it's so you can get off the road, it's not meant to take a vehicle that can't pass an inspection to a shop.God prefers Diesels and gentleroger Thank this. -
-
For arguments sake - say the customer won't allow repairs to be done on their property, moving to a repair facility would be "less hazardous to the public" than sitting on a shoulder. Then 396.7 would definitely come into play.
396 includes as many contradictory and ill thought out regulations as 395. My personal favorite is 396.9 (2) - a vehicle placed out of service may not be moved except " by means of a vehicle using a crane or hoist". Technically, my trailer could have been placed out of service, at which point I can't move it until repairs are made. However I can disconnect and have a tow truck pull it by cradle to the shop. Seriously?roshea, God prefers Diesels and ZVar Thank this. -
I have found you can get away with a lot if you just document the problem. DVIR,LOG BOOK ,ETC.
Even for company drivers flag it EVERY day until fixed.God prefers Diesels and ZVar Thank this. -
Rideandrepair Thanks this.
-
While not specifically steers these are the lowest limits for single axels I can find (outside the national network and interstate system)
- Michigan: 9,000 lbs. on all other highways (spaced less than 3 ft. 6 inches)
- Kentucky: 15,000 lbs. (with axle spacing of less than 42 inches)
Source: Compilation of Existing State Truck Size and Weight Limit Laws - Appendix A: State Truck Size and Weight Laws - FHWA Freight Management and OperationsRideandrepair Thanks this. -
-
WEIGHT LIMITS ON AXLES No axle may be loaded beyond the manufacturer's rating, Reg 413/05 schedules 1-31. No axle may be loaded beyond the following tire width limits as imprinted on the tire sidewalls: o Front steering axles and self-steer axles - 11 kg per mm of combined tire width o Drive axles and rigid trailer axles - 10 kg per mm of combined tire width o Tag axle on standard and intercity buses – 10 kg/mm of combined tire width
Yes this is in metric but still says width determines the weight.
Rusty never said what size tire was on the trucks that got got grabbed.
EG A 275 metric tire would be rated lower than an 11r standard
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 15 of 17